Mahdi Eynian

A Mechanistic Approach to Model Cutting Forces in Drilling with Indexable Inserts

Holes are made in many industrial parts that need screws, pins or channels for passing fluids. The general method to produce holes in metal cutting...

A modified Johnson-Cook model for ferritic-pearlitic steel in dynamic strain aging regime

In this study, the flow stress behavior of ferritic-pearlitic steel (C45E steel) is investigated through isothermal compression testing at differen...

Analytical Chatter Stability of Milling With Rotating Cutter Dynamics at Process Damping Speeds

This paper presents a chatter stability prediction method for milling flexible workpiece with end mills having asymmetric structural dynamics. The...

Analytical Stability Prediction in Five Axis Ball-End Milling

In five axis ball-end milling, the cutting edge is a continuous curve and the engagement with workpiece changes as the cutting tool rotates....

Cutter Exit Effects during Milling of Thin-walled Inconel 718

During milling of thin-walled components, chatter vibrations give rise to process issues. These include dimensional inaccuracy, damaged and scrap...

Dynamic effects on cutting forces with highly positive versus highly negative cutting edge geometries

Understanding the influence of the cutting edge geometry on the development of cutting forces during the milling process is of high importance in...

Effect of thin viscoelastic material treatments of the clamping region on dynamic stiffness of the cantilever beams

Cantilever beams and similar structures are found in machining systems. Often a set of cantilever beams attached to each other on spindle-tool hold...

Effect of tool wear on quality in drilling of titanium alloy Ti6Al4V, Part I : Cutting Forces, Burr Formation, Surface Quality and Defects

Titanium's Ti6Al4V, alloy is an important material with a wide range of applications in the aerospace industry.Due to its high strength, machining...

Effect of tool wear on quality in drilling of titanium alloy Ti6Al4V, Part II : Microstructure and Microhardness

Drilling of Ti6Al4V with worn tools can introduce superficial and easily measured features such as increase of cutting forces, entry and exit burrs...

Experimental analysis of cutting edge effects on vibrations in end milling

The ability to minimize vibrations in milling by the selection of cutting edge geometry and appropriate cutting conditions is an important asset in...

Finite Element Modeling and Validation of Chip Segmentation in Machining of AISI 1045 Steel

The finite element (FE) method based modeling of chip formation in machining provides the ability to predict output parameters like cutting forces...

Frequency Domain Study of Vibrations above and under Stability Lobes in Machining Systems

Using modified Nyquist contours, the dominant poles of the closed loop delay-differential equation for machining systems such as milling are...

Influence of cutting edge geometry on force build-up process in intermittent turning

In the intermittent turning and milling processes, during the entry phase the cutting edges are subjected to high impact loads that can give rise t...

Influence of radial depth of cut on dynamics of face milling application

The choice of milling cutter geometry and appropriate cutting data for certain milling application is of vital importance for successful machining...

Influence of radial depth of cut on entry conditions and dynamics in face milling application

The choice of milling cutter geometry and appropriate cutting data for certain milling application is of vital importance for successful machining...

In-process identification of modal parameters using dimensionless relationships in milling chatter

Machining parameters needed for stable, high-performance high-speed machining could be found using mathematical models that need accurate...

Milling Strategies for Thin-walled Components

Recent developments in the Aerospace industry have led to thin-walled, reduced-weight engine designs. Due to demands in manufacturing, production...

Minimization of chatter in machining by the use of mobile platform technologies

Minimizing the Negative Effects of Coolant Channels on the Torsional and Torsional-Axial Stiffness of Drills

Coolant channels allow internal coolant delivery to the cutting region and significantly improve drilling, but these channels also reduce the...

New methods for in-process identification of modal parameters in milling

Chatter vibrations encountered in machining can degrade surface finish and damage the machining hardware. Since chatter originates from unstable...

Predicting Continuous Chip to Segmented Chip Transition in Orthogonal Cutting of C45E Steel through Damage Modeling

Machining process modeling has been an active endeavor for more than a century and it has been reported to be able to predict industrially relevant...

Prediction of vibration frequencies in milling using modified Nyquist method

Study of the vibration frequencies at different cutting conditions is an alternative to the use of impact hammer test for identification of natural...

Process Stability Strategies in Milling of Thin-walled Inconel 718

Trends in Aerospace development have led to thin-walled, reduced-weight engine designs. The demands in manufacturing have forced production speeds...

Selection of chatter-free milling conditions using vibration frequency measurements

Unwanted vibration of the tool with respect to the workpiece, known as chatter, can damage machine tool, cutting tool, and the surface finish of th...

Sensitivity of Axis Tracking Errors of Machine Tools to Tool Wear in Drilling

Axis Tracking Errors (ATEs) of the active and inactive axis of numerically controlled machine tools are presented as new means of detection of tool...

Simulation-Based Product Development Framework for Cutting Tool Geometry Design

Cutting tool geometry design has traditionally relied on experimental studies; while engineering simulations, to the level of industrial deployment...

Sound Analysis in Drilling, Frequency and Time Domains

This paper proposes a guideline for interpreting frequency content and time history of sound measurements in metal drilling processes. Different...

Studies on surface roughness in stable and unstable end-milling

Surface roughness is an important aspect of a machined piece and greatly influences its performance. This paper presents the surface roughness of...

Time Domain Simulation of Chatter Vibrations in Indexable Drills

Regenerative chatter vibrations are common in drilling processes. These unwanted vibrations lead to considerable noise levels, damage the quality o...

Time-Domain Modeling of Torsional-Axial Chatter Vibrations in Indexable Drills with Low Damping

In drills with helical chip flutes the coupling between axial and rotational degrees-of-freedom can cause chatter vibrations. These torsional-axial...

University-industry collaboration in curriculum design and delivery : A model and its application in manufacturing engineering courses

The advantages and importance of university-industry collaboration, particularly in curriculum design and delivery, are well-known. However, althou...

Vibration frequencies in stable and unstable milling

Vibration frequencies in machining may be employed for calculation of natural frequencies of the dominant modes in chatter and selection of...