Antingen stödjer din webbläsare inte javascript, eller är javascript inaktiverat. Denna webbplats fungerar bäst om du aktiverar javascript.

Nageswaran Tamil Alagan

Doktorand

Staff member at Division of Subtractive and Additive Manufacturing.


Currently working on the investigation of heat dissipation in boundary layer interaction of cutting tool-fluid in Heat Resistant Super Alloy, HRSA; machining with the Forced Coolant Application, FCA. Experiments are now conducted on Alloy 718 with carbide cutting tools.

https://www.researchgate.net/profile/Nageswaran_Tamil_Alagan 

 


Publications


Effects of high pressure cooling in the flank and rake faces of WC tool on the tool wear mechanism and process conditions in turning of alloy 718

Published

Effects of high pressure cooling in the flank and rake faces of WC tool on the tool wear mechanism and process conditions in turning of alloy 718

The exceptional properties of Heat Resistant Super Alloys (HRSA) justify the search for advanced technologiesthat can improve the capability of...

Investigation of micro-textured cutting tools used for face turning of alloy 718 with high-pressure cooling

Published

Investigation of micro-textured cutting tools used for face turning of alloy 718 with high-pressure cooling

There is an increasing demand to improve the service life of cutting tools during machining of heat resistant superalloys (HRSA). Various studies...

Influence of Surface Features for Increased Heat Dissipation on Tool Wear

Published

Influence of Surface Features for Increased Heat Dissipation on Tool Wear

The critical problems faced during the machining process of heat resistant superalloys, (HRSA), is the concentration of heat in the cutting zone an...

Characterization of tool wear when machining alloy 718 with high-pressure cooling using conventional and surface-modified WC-Co tools

Published

Characterization of tool wear when machining alloy 718 with high-pressure cooling using conventional and surface-modified WC-Co tools

Coolant supplied by high pressure into the cutting zone has shown the lower thermal loads on the tool when machining difficult-to-cut materials as...

Flank wear characteristics of WC-Co tools when turning Alloy 718 with high-pressure coolant supply

Published

Flank wear characteristics of WC-Co tools when turning Alloy 718 with high-pressure coolant supply

In the present study, the tool wear mechanisms of uncoated cemented tungsten carbide (WC-Co) tools during machining Alloy 718 with high-pressure...

Textured insert for improved heat extraction in combination with high-pressure cooling in turning of superalloys

Published

Textured insert for improved heat extraction in combination with high-pressure cooling in turning of superalloys

Heat generated in a machining process is a common and critical obstacle faced in today's machining industries. The heat generated in the cutting zo...

Characterization of tool wear when machining Alloy 718 with high pressure cooling using conventional and surface-modified WC-Co tools

Published

Characterization of tool wear when machining Alloy 718 with high pressure cooling using conventional and surface-modified WC-Co tools

Coolant supplied by high pressure into the cutting zone has shown to lower thermal loads on the tool when machining difficult-to-cut materials as...

EDS Analysis of Flank Wear and Surface Integrity in Machining of Alloy 718 with Forced Coolant Application

Published

EDS Analysis of Flank Wear and Surface Integrity in Machining of Alloy 718 with Forced Coolant Application

There has been extensive research on forced coolant application, usually known as high pressure coolant, in machining heat resistant super alloys....

Investigation of Modified Cutting Insert with Forced Coolant Application in Machining of Alloy 718

Published

Investigation of Modified Cutting Insert with Forced Coolant Application in Machining of Alloy 718

Abstract In the last decades machining methods have witnessed an advancement in both cutting tools and coolant/lubrication, sometimes in combinatio...

Next Generation Insert for Forced Coolant Application in Machining of Inconel 718

Published

Next Generation Insert for Forced Coolant Application in Machining of Inconel 718

Machining technology has undergone an extensive evolution throughout the last decades in its capability to machine hard-to-cut material. This paper...