Antingen stödjer din webbläsare inte javascript, eller är javascript inaktiverat. Denna webbplats fungerar bäst om du aktiverar javascript.

Shrikant Joshi

Professor

Staff member at Division of Subtractive and Additive Manufacturing.

Conducts research in engineering and technology, chemical engineering, production technology.


Research area/research interest

My current research interests span the areas of Additive Manufacturing (AM) and Surface Engineering. My AM-related research presently focuses on Ni-based superalloys and I am specifically interested in exploring the influence of post-treatment on build properties. Apart from the considerable existing strengths in various allied areas of AM here at University West, a strong network of industrial partners like GKN, Siemens, Sandvik, Arcam, Qunitus and Exova with complementary strengths makes this activity particularly interesting. Presently, funding from KK.Stiftelsen and Vinnova fuels this part of my research. Complementing my previous research in Surface Engineering that has included studies involving varied coating technologies, namely conventional atmospheric & solution precursor plasma spraying, detonation spraying, cold gas dynamic spraying, electron beam physical vapour deposition and cathodic arc PVD, my specific research focus for the past two years has been on solution-based plasma spraying, investigation of hybrid coatings involving use of solution and powder feedstock as well as on high velocity air-fuel (HVAF) coatings.

The objective is to enhance the functional properties of the coatings (thermal barrier, wear, corrosion etc.) beyond those achievable by conventional powder-based thermal spray routes. One of the projects funded by KK.Stiftelsen deals with assessment of different coating chemistries, with distinct scale-forming abilities, under various simulated and actual boiler environments. Another exciting activity that I spearhead deals with development of luminescent coatings in collaboration of ESS, University of Oslo and Stony Brook University.

Teaching/supervision

I have developed a course on Surface Engineering which was offered during Autumn 2016 under the Produktion 2030

Keyword

Additive manufacturing, EBM, post-treatment, HIP, Solution precursor plasma spraying (SPPS), Suspension plasma spraying (SPS), hybrid, thermal barrier, TBC, coatings, wear, corrosion, luminescent.

Publications

Shrikant Joshi's list of publications

Publications


A facile approach to deposit graphenaceous composite coatings by suspension plasma spraying

Published

A facile approach to deposit graphenaceous composite coatings by suspension plasma spraying

This paper demonstrates, for the first time ever, the deposition of graphenaceous composite coatings using an easy, yet robust, suspension plasma...

A Review of Technology Commercialization Models : Suitability for Indian Research and Technology Organizations (RTOs) in Advanced Materials Sector

Published

A Review of Technology Commercialization Models : Suitability for Indian Research and Technology Organizations (RTOs) in Advanced Materials Sector

Accuracy, Reliability and Reproducibility of Various Mechanical Test Techniques : Preface

Published

Accuracy, Reliability and Reproducibility of Various Mechanical Test Techniques : Preface

An Analytical Approach to Plasma Spraying

Published

An Analytical Approach to Plasma Spraying

Axial suspension plasma spraying of Al2O3 coatings for superior tribological properties

Published

Axial suspension plasma spraying of Al2O3 coatings for superior tribological properties

Suspension plasma spray is a relatively new thermal spray technique which enables feeding of fine powder to produce advanced coatings for varied...

Chlorine-induced high temperature corrosion of HVAF-sprayed Ni-based alumina and chromia forming coatings

Published

Chlorine-induced high temperature corrosion of HVAF-sprayed Ni-based alumina and chromia forming coatings

Chlorine-induced corrosion of HVAF-sprayed Ni21Cr and Ni5Al coatings was investigated in 5 vol.% O2 + 500vppm HCl + N2 with and without KCl at 600 ...

Chlorine-induced high-temperature corrosion and erosion-corrosion of HVAF and HVOF-sprayed amorphous Fe-based coatings

Published

Chlorine-induced high-temperature corrosion and erosion-corrosion of HVAF and HVOF-sprayed amorphous Fe-based coatings

Chlorine-induced high-temperature corrosion and erosion-corrosion behavior of amorphous Fe-based coatings sprayed by high velocity air-fuel (HVAF)...

Coating formation by solution precursor plasma spraying and prospects for powder-solution hybrid processing

Published

Coating formation by solution precursor plasma spraying and prospects for powder-solution hybrid processing

Correlation of splat state with deposition characteristics of cold sprayed niobium coatings

Published

Correlation of splat state with deposition characteristics of cold sprayed niobium coatings

The cold spray technique has a great potential to deposit refractory metals for a variety of potential applications. Cold spraying of different...

CrAlSiN nanocomposite thin films for high-speed machining applications

Published

CrAlSiN nanocomposite thin films for high-speed machining applications

CrAlSiN nanocomposite thin films with varying film chemistry were developed on tungsten carbide (WC)specimens using cylindrical cathodic arc physic...

Cu(In,Ga)Se2 Films with Branched Nanorod Architectures Fabricated by Economic and Environmentally Friendly Pulse-Reverse Electrodeposition Route

Published

Cu(In,Ga)Se2 Films with Branched Nanorod Architectures Fabricated by Economic and Environmentally Friendly Pulse-Reverse Electrodeposition Route

Cu(In,Ga)Se2 (CIGS) materials are one of the most promising solar cell technologies owing to their large absorption coefficient and tunable direct...

Deposition of Novel Composite Coatings by Suspension-Powder Hybrid Plasma Spraying

Published

Deposition of Novel Composite Coatings by Suspension-Powder Hybrid Plasma Spraying

Suspension Plasma Spray (SPS) is an emerging technique which overcomes the difficulties typically associated with feeding of fine (submicron or...

Development of high-performance cols-sprayed nano-structured NI-20Cr coatings for hash environment of power plant boilers

Published

Development of high-performance cols-sprayed nano-structured NI-20Cr coatings for hash environment of power plant boilers

Effect of chromium and aluminum addition on anisotropic and microstructural characteristics of ball milled nanocrystalline iron

Published

Effect of chromium and aluminum addition on anisotropic and microstructural characteristics of ball milled nanocrystalline iron

Prior studies on synthesis of nanocrystalline elements have discussed the effect of ball milling on lattice parameter, crystallite size, and...

Effect of concentration and molecular weight of polyethylenimine on zeta potential, isoelectric point of nanocrystalline silicon carbide in aqueous and ethanol medium

Published

Effect of concentration and molecular weight of polyethylenimine on zeta potential, isoelectric point of nanocrystalline silicon carbide in aqueous and ethanol medium

The effect of dispersant concentration and its molecular weight on zeta potential of nanocrystalline silicon carbide in an aqueous medium was...

Effect of Different Post-treatments on the Microstructure of EBM-Built Alloy 718

Published

Effect of Different Post-treatments on the Microstructure of EBM-Built Alloy 718

Electron beam melting (EBM) of Alloy 718 is of rapidly growing interest as it allows cost-effective production of complex components. However, the...

Effect of Heat Treatment on Mechanical Properties and Corrosion Performance of Cold-Sprayed Tantalum Coatings

Published

Effect of Heat Treatment on Mechanical Properties and Corrosion Performance of Cold-Sprayed Tantalum Coatings

The cold-spray technique is of significant interest to deposit refractory metals with relatively high melting point for a variety of demanding...

Effect of hole-transporting materials on the photovoltaic performance and stability of all-ambient-processed perovskite solar cells

Published

Effect of hole-transporting materials on the photovoltaic performance and stability of all-ambient-processed perovskite solar cells

High-efficiency perovskite solar cells (PSCs) reported hitherto have been mostly prepared in a moisture and oxygen-free glove-box atmosphere, which...

Effect of nitrogen pressure on mechanical properties of nc-TiAlN/a-Si3N4 nanocomposite coatings deposited by cathodic arc PVD process

Published

Effect of nitrogen pressure on mechanical properties of nc-TiAlN/a-Si3N4 nanocomposite coatings deposited by cathodic arc PVD process

The present work investigates effect of nitrogen pressure on composition and mechanical properties of superhard nc-TiAlN/a-Si3N4 nanocomposite...

Effect of pressure and temperature on densification, microstructure and mechanical properties of spark plasma sintered silicon carbide processed with β-silicon carbide nanopowder and sintering additives

Published

Effect of pressure and temperature on densification, microstructure and mechanical properties of spark plasma sintered silicon carbide processed with β-silicon carbide nanopowder and sintering additives

The effects of applied pressure and temperature during spark plasma sintering (SPS) of additive-containing nanocrystalline silicon carbide on its...

Effect of SiO2 Dispersion on Chlorine-Induced High-Temperature Corrosion of High-Velocity Air-Fuel Sprayed NiCrMo Coating

Published

Effect of SiO2 Dispersion on Chlorine-Induced High-Temperature Corrosion of High-Velocity Air-Fuel Sprayed NiCrMo Coating

NiCrMo coatings with and without dispersed SiO2 were deposited using high-velocity air-fuel technique. Thermogravimetric experiments were conducted...

Effect of SPPS Process Parameters on In-Flight Particle Generation and Splat Formation to Achieve Pure α-Al2O3 Coatings

Published

Effect of SPPS Process Parameters on In-Flight Particle Generation and Splat Formation to Achieve Pure α-Al2O3 Coatings

The present paper describes the role of process conditions in developing phase-pure α-Al<inf>2</inf>O<inf>3</inf> coatings using solution precursor...

Effect of substrate roughness on adhesion and tribological properties of nc-TiAlN/a-Si3N4 nanocomposite coatings deposited by cathodic arc PVD process

Published

Effect of substrate roughness on adhesion and tribological properties of nc-TiAlN/a-Si3N4 nanocomposite coatings deposited by cathodic arc PVD process

TiN and Ti–Al–Si–N nanocomposite coatings of the type nc-TiAlN/a-Si3N4 have been prepared by cathodic arc physical vapour deposition process using...

Effect of water vapor on the oxidation behavior of HVAF-sprayed NiCr and NiCrAlY coatings

Published

Effect of water vapor on the oxidation behavior of HVAF-sprayed NiCr and NiCrAlY coatings

Isothermal oxidation behavior of NiCr and NiCrAlY coatings deposited onto low alloy 16Mo3 steel by high-velocity air fuel (HVAF) process was...

Effects of surface finish on the initial oxidation of HVAF-sprayed NiCoCrAlY coatings

Published

Effects of surface finish on the initial oxidation of HVAF-sprayed NiCoCrAlY coatings

Oxide scale formed on HVAF-sprayed NiCoCrAlY coatings and the effect of surface treatment were investigated by a multi-approach study combining...

Engineered surfaces for automotive engine and power train components

Published

Engineered surfaces for automotive engine and power train components

In the present era where light weighting of vehicles to meet legislation driven emission norms has gathered much pace, the surface engineering...

Evaluation of high temperature oxidation behavior of a cold spray Ni-20Cr nano-structured coating

Published

Evaluation of high temperature oxidation behavior of a cold spray Ni-20Cr nano-structured coating

Experiences of spraying fine powders dissolved in alcohol or water

Published

Experiences of spraying fine powders dissolved in alcohol or water

Experimental visualization of microstructure evolution during suspension plasma spraying of thermal barrier coatings

Published

Experimental visualization of microstructure evolution during suspension plasma spraying of thermal barrier coatings

This paper investigates the evolution of microstructure of thermal barrier coatings (TBCs) produced by suspension plasma spraying (SPS) through a...

Facile One-Step Route for the Development of in Situ Cocatalyst-Modified Ti3+ Self-Doped TiO2 for Improved Visible-Light Photocatalytic Activity

Published

Facile One-Step Route for the Development of in Situ Cocatalyst-Modified Ti3+ Self-Doped TiO2 for Improved Visible-Light Photocatalytic Activity

Development of visible-light-driven photocatalysts by employing a relatively simple, efficient, and cost-effective one-step process is essential fo...

Fracture behaviour of nc-TiAlN/a-Si3N4 nanocomposite coating during nanoimpact test

Published

Fracture behaviour of nc-TiAlN/a-Si3N4 nanocomposite coating during nanoimpact test

Cyclic nanoimpact tests were carried on nc-TiAlN/a-Si3N4 nanocomposite, TiN and multilayered TiN/nanocomposite (NC) coatings to evaluate their...

Function-dependent coating architectures by hybrid powder-suspension plasma spraying : Injector design, processing and concept validation

Published

Function-dependent coating architectures by hybrid powder-suspension plasma spraying : Injector design, processing and concept validation

The attractive properties achieved by Suspension Plasma Spraying (SPS), combined with the availability of high throughput capable plasma spray...

High performance broad band antireflective coatings using a facile synthesis of ink-bottle mesoporous MgF2 nanoparticles for solar applications

Published

High performance broad band antireflective coatings using a facile synthesis of ink-bottle mesoporous MgF2 nanoparticles for solar applications

Ultra-low refractive index thin films suitable for practical antireflective (AR) applications must be highly transparent, economical, and durable...

High Temperature Corrosion of HVAF-Sprayed NiCrAlY Coating Exposed to Various Corrosive Environments

Published

High Temperature Corrosion of HVAF-Sprayed NiCrAlY Coating Exposed to Various Corrosive Environments

High Temperature Erosion-Corrosion behavior of HVAF- &amp; HVOF-Sprayed Fe-based Coatings

Published

High Temperature Erosion-Corrosion behavior of HVAF- & HVOF-Sprayed Fe-based Coatings

High temperature oxidation behaviour of directionally solidified nickel base superalloy CM–247LC

Published

High temperature oxidation behaviour of directionally solidified nickel base superalloy CM–247LC

The present paper describes the isothermal and cyclic oxidation behaviour of the technologically important nickel base directionally solidified...

High temperature stable solar selective coatings by cathodic arc PVD for heat collecting elements

Published

High temperature stable solar selective coatings by cathodic arc PVD for heat collecting elements

A functionally multilayered Cr/CrTiAlN-G/TiAlN/AlSiN/AlSiO coating configuration, suitable for enhancing solar selectivity of stainless steel...

High-Temperature Corrosion of HVAF-Sprayed Ni-Based Coatings for Boiler Applications

Published

High-Temperature Corrosion of HVAF-Sprayed Ni-Based Coatings for Boiler Applications

The present study investigates the initial corrosion behaviour of HVAF-sprayed NiCr, NiAl and NiCrAlY coatings in two different environments, O 2 +...

Hot corrosion behavior of plasma sprayed powder-solution precursor hybrid thermal barrier coatings

Published

Hot corrosion behavior of plasma sprayed powder-solution precursor hybrid thermal barrier coatings

In recent times, plasma sprayed powder-solution precursor hybrid composite thermal barrier coatings have been developed to harness the dual benefit...

Hot corrosion behavior of solution precursor and atmospheric plasma sprayed thermal barrier coatings

Published

Hot corrosion behavior of solution precursor and atmospheric plasma sprayed thermal barrier coatings

Hot corrosion behavior of solution precursor plasma spray (SPPS) thermal barrier coating (TBC) in molten salt mixtures of 90wt.% Na<inf>2</inf>SO<i...

HVAF spraying for biomass boiler applications: : Oxidation behavior of Ni-based coatings in moisture-laden environment

Published

HVAF spraying for biomass boiler applications: : Oxidation behavior of Ni-based coatings in moisture-laden environment

Hybrid powder-suspension Al2O3-ZrO2 coatings by axial plasma spraying: Processing, characteristics &amp; tribological behavior

Published

Hybrid powder-suspension Al2O3-ZrO2 coatings by axial plasma spraying: Processing, characteristics & tribological behavior

Hybrid powder-suspension Al2O3-ZrO2 coatings by axial plasma spraying : Processing, characteristics &amp; tribological behaviour

Published

Hybrid powder-suspension Al2O3-ZrO2 coatings by axial plasma spraying : Processing, characteristics & tribological behaviour

The ability of suspension plasma spraying (SPS) to overcome difficulties associated with feeding of fine (submicron or nano-sized) powders and...

Hybrid Processing with Powders and Solutions : A Novel Approach to Deposit Composite Coatings

Published

Hybrid Processing with Powders and Solutions : A Novel Approach to Deposit Composite Coatings

Thermal spraying employing either solution precursor or suspension feedstock offers an exciting opportunity to obtain coatings with microstructures...

Increasing α-phase content of alumina-chromia coatings deposited by suspension plasma spraying using hybrid and intermixed concepts

Published

Increasing α-phase content of alumina-chromia coatings deposited by suspension plasma spraying using hybrid and intermixed concepts

The novel method of hybrid suspension plasma spraying of dry coarse aluminum oxide powder with chromium oxide suspension using hybrid water/argon-s...

Influence of annealing on mechanical and electrochemical properties of cold sprayed niobium coatings

Published

Influence of annealing on mechanical and electrochemical properties of cold sprayed niobium coatings

Abstract In the present study, thick and dense niobium coatings were obtained using cold spray technique by using air as a process gas. Inter-splat...

Influence of applied pressure during field-assisted sintering of Ti(C,N)-WC-FeAl based nanocomposite

Published

Influence of applied pressure during field-assisted sintering of Ti(C,N)-WC-FeAl based nanocomposite

Ti(C,N)-WC-FeAl based nanocomposites are processed by field-assisted sintering at 1500 degrees C. The phase and microstructural evolution during th...

Influence of Isothermal Heat Treatment on Porosity and Crystallite Size in Axial Suspension Plasma Sprayed Thermal Barrier Coatings for Gas Turbine Applications

Published

Influence of Isothermal Heat Treatment on Porosity and Crystallite Size in Axial Suspension Plasma Sprayed Thermal Barrier Coatings for Gas Turbine Applications

xial suspension plasma spraying (ASPS) is an advanced thermal spraying technique, which enables the creation of specific microstructures in thermal...

Influence of KCl and HCl on high temperature corrosion of HVAF-sprayed NiCrAlY and NiCrMo coatings

Published

Influence of KCl and HCl on high temperature corrosion of HVAF-sprayed NiCrAlY and NiCrMo coatings

The oxidation performance of NiCrAlY and NiCrMo coatings thermally sprayed by high velocity air-fuel (HVAF) technique has been investigated in a...

Influence of Microstructure on Thermal Properties of Axial Suspension Plasma-Sprayed YSZ Thermal Barrier Coatings

Published

Influence of Microstructure on Thermal Properties of Axial Suspension Plasma-Sprayed YSZ Thermal Barrier Coatings

Suspension plasma spraying is a relatively new thermal spaying technique to produce advanced thermal barrier coatings (TBCs) and enables production...